Peripheral Rack Drive Thickener Mining Thickner for Processing Plant Tailings Treatment
Introduction:
ZG peripheral transmission mud scraper is mainly composed of central slewing bearing, rotation frame, scraper and scum board, current collecting device, driving mechanism, track and traveling wheel, etc.
Working Mechanism:
Its working mechanism is as follows: raw water flows out from the tank bottom via the central buttress; after water distribution by draft tube, the effluent is discharged to the catch basins around the tank in radiating pattern; with the reduction of flow rate, the suspended matters in the raw water are separated and deposited to the tank bottom. The rotation frame takes the central bearing as the circle center; under the function of driving mechanism, the travelling wheel at the end rotates along the peripheral tracks, driving the scraper board which rotates slowly under it along a near log spiral moving trajectory; the scraper board scrapes the mud to the mud catch basin at the center of setting tank, then the mud is discharged out of the tank by hydraulic pressure or pump while the scum on the top is scraped to the scum hopper by scum board and then discharged.
Advantages
1. Simple structure, low energy consumption, convenient management and maintenance
2. Smooth operation, safe and reliable work
3. Good effect of scraping sludge and low moisture content of discharged sludge
Features
1. Simple structure and light weight: It adopts a row frame structure, which is much lighter than traditional equipment.
2. It can be equipped with over-torque protection mechanism, when the torque reaches the set value, it will automatically alarm and stop and run;
3. The maintenance is simple and convenient, and the operating cost is low.
4. The new type of transmission, the reducer adopts a cycloid reducer, which is easy to install, simple and compact in structure, and high in efficiency.
5. The electrical components adopt outdoor models, with random control or remote networking.
6. Because the main shaft adopts a tube structure with high rigidity, there is no bearing at the bottom of the pool, which eliminates the maintenance work of the extremely bad pool bottom.
Parameter
| Models and specifications | ZG-16 | ZG-18 | ZG-20 | ZG-22 | ZG-24 | ZG-25 | ZG-28 | ZG-30 | ZG-35 | ZG-37 | ZG-40 | |
| Applicable tank diameter (m) | 16 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 35 | 37 | 40 | |
| Motor power (kw) | 1.1 | 1.5 | 2.2 | 3.0 | ||||||||
| Speed of scraper board at the margin | Primary setting tank | 2-3 | ||||||||||
| Secondary setting tank | 1.5-2.5 | |||||||||||
|
Embedded and civil engineering conditions (m)
|
D1 | 2800 | 2800 | 3000 | 3000 | 3500 | 4000 | 4000 | 4200 | 4200 | 4500 | 4500 |
| D2 | 1350 | 1400 | ||||||||||
| H1 | 1800 | |||||||||||
| a | 1200 | 1200 | 1400 | 1400 | 1400 | 1400 | 1800 | 1800 | 2000 | 2000 | 2000 | |
| b | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | 1000 | 800 | 1000 | 1200 | |
| c | 280 | 280 | 300 | 300 | 300 | 300 | 320 | 320 | 280 | 320 | 350 | |
| d | 200 | 250 | ||||||||||
| H2 | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 1000 | 1000 | |
| e | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | |
| Load (t) | P | 4.0 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 8 | 9.5 | 11 | 11.5 |
| W | 4.5 | 5 | 5.5 | 5 | 5.5 | 7 | 7.5 | 8.5 | 10 | 11.5 | 12 | |
Why choose our company machine?
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.
