Optimized Mining Flotation Equipment JJF II Flotation Machine with Good Dispersion Effect
This machine runs by the triangle belt of the electrical motor driving the impellor to rotate, producing centrifugal effect which will form negative pressure, and on one hand it will absorb sufficient air in order to mix with the pulp, and on the other hand it will mix the pulp in order to mix with the reagents, and at the same time will refine the foam in order to stick the minerals onto the foam, and float on the surface of the pulp in order to become mineralization foam. The workers can adjust the height of the flashboard and control the liquid level in order to scrap the useful foam.
JJF Flotation Machine is shallow-tank flotation machine which only absorb air but not ore pulp naturally.
Structural features: Shallow-tank, small diameter of impeller, low rotating speed, low power consumption, big gap between the impeller and the stator; the stator is a cylinder with elliptical hole, which is conducive for the mixing and dispersion of air and ore pulp; the height of stator is lower than that of impeller, the circulation volume of ore pulp is big, up to 2.5 times; the umbrella-type perforated distributing cover of stator can separate the vortex produced by impeller from the foam layer, hence maintaining the steadiness of ore pulp surface.
Performance features: The circulation volume of ore pulp is big, up to 2.5 times, which is conducive to the mineralization of ores, agent and air; large air inflow, good dispersion effect, appropriate degree of stirring; with a moderate agitating strength, the solid particles being well suspended without settlement and with no need for ore drawing when parking; it can handle a wide range of particle sizes with high ore dressing recovery percentage.
The combined unit formed by JJF and SF flotation machines, with SF flotation machine as suction cell and JJF flotation machine as green cell, can realize horizontal deployment with no need for drop and foam pump. JJF flotation machine only has the ability of air self-suction, and when it is used alone, step-wise installation between operations should be adopted with the drop being 300-400mm and foam pump should be set up to send the foam back to middlings.
|Models||Effective capacity||Dimensions of cell (L x W x H)||Handling capacity||Installed power||Air inflow||Rotating speed of scraper blade||Single cell weight|
Why choose our company machine?
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.
|Tel :||0086 17611625682|